Further Setting - Lutron Electronics SL-4112 Operation Manual

c) During the Data Logger function is executed, press the
" Logger Button " ( 3-6, Fig. 1 ) once will stop the
data logger function, the " REC. " symbol will stop to
flash.
If press the " Logger Button " ( 3-6, Fig. 1 ) once again
will continuous the Data Logger function.
Note :
If intend to change the data logger sampling time, please
1)
refer section 5-3, page 17.
If intend to know the space of balance data numbers into the
2)
memory IC, please refer section 5-4, page 17.
If intend to clear the saving data from the memory please
3)
refer section 5-5, page 17.
5. ADVANCED SETTING
PROCEDURES
Before executing Advanced Setting Procedures,
exit the " Hold function " and the Record "
function first.
* Press " Setting Button " continuously at
least 5 seconds to enter the setting function.
* After already set the desiring value ( function ),
press the " Enter button " to save with default.
* Press the " Unit button " to the next setting
function.
* Press the "
function.
* Press the " Esc button " to escape the setting
procedures.
Button Button " to the next setting
▲ ▼
15