Em-900P ( Humidity, Anemometer, Light ) - Lutron Electronics SL-4112 Operation Manual

4-3 EM-900P ( Humidity, Anemometer, Light )

1) Plug the optional probe EM-900P's plug into the " Probe
Input Socket " ( 3-11, Fig. 1 ).
Slide " Probe lock switch " ( 3-11A, Fig. 1 ) to the " 1 "
position.
2) Power on by pressing the " Power On/Off Button " ( 3-3,
Fig. 1 ) , the meter's default function is " Sound
level meter with auto range "
Press the " Mode Button " ( 3-6, Fig. 1 ) once will
enter to following mode in sequence.
Thermometer ( type K, type J )
Anemometer with Temp.
Humidity with Temp.
Light meter
3) After already select the desiring mode, release the
Mode Button ".
Press the /
℃ ℉
Temp. unit to
the or symbol.
℃ ℉
Press the " Unit Button " once can select the display unit
for each mode.
Anemometer unit : m/S, Km/h, FPM, knot, mph.
Light unit : Lux, Ft-cd.
4) Data Hold
Same as page 11
5) Data Record ( Max., Min. reading )
Same as page 11
Button " ( 3-7, Fig. 1 ) can select the
or , in the same time LCD will show
℃ ℉
13