Chapter 2 Connections And Controls; Front Panel - Datavideo DAC-45 Instruction Manual

Chapter 2
2.1

Front Panel

Connections and Controls
Power Switch
Turns ON/OFF the device
Source LED Indicators
Only one input can be enabled at a time. For details on how
to select the source, see the DIP Switch descriptions in the
Rear Panel
ON (Red): Enabled but signal not detected
ON (Green): Enabled with valid connection
OFF: Disabled
Output Mode LED Indicators
Only one output mode can be enabled at a time. For details
on how the output mode can be selected, see the DIP Switch
descriptions in the
ON (Green): Enabled
OFF: Disabled
section.
Rear Panel
section.