Rear Panel - Datavideo DAC-45 Instruction Manual

2.2

Rear Panel

Video IN
VGA IN
This port connects the VGA source device. Set the DIP SW 1/2
to 00 before connecting the VGA source device to this port.
HDMI IN
This port connects the HDMI source device. Set the DIP SW
1/2 to 01 before connecting the HDMI source device to this
port.
SDI IN
This port connects the SDI source device. Set the DIP SW 1/2
to 10 before connecting the SDI source device to this port.
REF IN (Genlock)
The DAC-45 can be synchronized with the connected input
device. REF IN will accept Tri-level and Black Burst sync. Set
DIP SW 3 to 1 to enable the Genlock feature. To disable this
port, simply set DIP SW 3 to 0.
Video OUT
HDMI OUT
This port connects the HDMI destination device.
SDI OUT
This port connects the SDI destination device.
Audio IN
Audio Input – Stereo RCA (Left/Right)
Connects unbalanced analog audio source (stereo) for audio
embedding.