Table of Contents
Advertisement
Mode Select
DIP Switch
The DIP Switch allows you to configure the device settings.
The table below provides details of the DIP Switch Settings.
SOURCE sets the type of the input device connected.
GENLOCK enables/disables the REF IN port.
AUDIO allows you to determine the audio source.
Note: No audio is heard after switching the VGA IN audio
source to the HDMI audio source.
4K toggles between Full HD and 4K modes.
VIDEO OUTPUT sets the resolution and frame rate (the output
mode). Please note the low nibble determines the resolution
and frame rate of the output depending on the setting of the
4K bit.
Firmware Upgrade
USB firmware upgrade port
Connects the DAC-45 device to the PC for firmware upgrade.
See the
Firmware Update
section for details.
DC IN
DC In Socket
Connects the supplied 12V PSU to this socket. The connection
can be secured by screwing the outer fastening ring of the DC
In plug to the socket.
Advertisement
Table of Contents
