HP 5900 Series Configuration Manual page 156

High availability configuration guide
Hide thumbs Also See for 5900 Series:
Table of Contents

Advertisement

The output shows that the status of the track entry is Positive, indicating that the next hop 10.2.1.2 is
reachable.
# Display the routing table of Switch A.
[SwitchA] display ip routing-table
Destinations : 9
Destination/Mask
10.2.1.0/24
10.2.1.1/32
10.3.1.0/24
10.3.1.1/32
20.1.1.0/24
20.1.1.1/32
30.1.1.0/24
127.0.0.0/8
127.0.0.1/32
The output shows that the master static route takes effect. Switch A forwards packets to 30.1.1.0/24
through Switch B.
# Remove the IP address of interface VLAN-interface 2 on Switch B.
<SwitchB> system-view
[SwitchB] interface vlan-interface 2
[SwitchB-Vlan-interface2] undo ip address
# Display information about the track entry on Switch A.
[SwitchA] display track all
Track ID: 1
State: Negative
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Tracked object:
BFD session mode: Echo
Outgoing interface: Vlan-interface2
VPN instance name: -
Remote IP: 10.2.1.2
Local IP: 10.2.1.1
The output shows that the status of the track entry is Negative, indicating that the next hop 10.2.1.2 is
unreachable.
# Display the routing table of Switch A.
[SwitchA] display ip routing-table
Destinations : 9
Destination/Mask
10.2.1.0/24
10.2.1.1/32
10.3.1.0/24
Routes : 9
Proto
Pre
Cost
Direct 0
0
Direct 0
0
Direct 0
0
Direct 0
0
Direct 0
0
Direct 0
0
Static 60
0
Direct 0
0
Direct 0
0
Routes : 9
Proto
Pre
Cost
Direct 0
0
Direct 0
0
Direct 0
0
150
NextHop
Interface
10.2.1.1
Vlan2
127.0.0.1
InLoop0
10.3.1.1
Vlan3
127.0.0.1
InLoop0
20.1.1.1
Vlan5
127.0.0.1
InLoop0
10.2.1.2
Vlan2
127.0.0.1
InLoop0
127.0.0.1
InLoop0
NextHop
Interface
10.2.1.1
Vlan2
127.0.0.1
InLoop0
10.3.1.1
Vlan3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5920 series

Table of Contents