HP 5900 Series Configuration Manual page 148

[SwitchB-Vlan-interface2] vrrp vrid 1 virtual-ip 192.168.0.10
[SwitchB-Vlan-interface2] return
Verifying the configuration
# Display detailed information about the VRRP group on Switch A.
<SwitchA> display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Object
# Display information about track entry 1 on Switch A.
<SwitchA> display track 1
Track ID: 1
State: Positive
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Tracked object:
BFD session mode: Echo
Outgoing interface: Vlan-interface2
VPN instance name: -
Remote IP: 1.1.1.2
Local IP: 1.1.1.1
# Display detailed information about the VRRP group on Switch B.
<SwitchB> display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
The output shows that when the status of track entry 1 becomes Positive, Switch A is the master, and
Switch B the backup.
: Standard
: 1
: Up
: 110
: Yes
: None
: 192.168.0.10
: 0000-5e00-0101
: 192.168.0.101
: 1
: Standard
: 1
: Up
: 100
: Yes
: 2200ms left
: None
: 192.168.0.10
: 192.168.0.101
142
Adver Timer : 100
State : Master
Running Pri : 110
Delay Time : 0
State : Positive
Adver Timer : 100
State : Backup
Running Pri : 100
Delay Time : 0
Pri Reduced : 20