Examples For Sms Command Parameters - M2M Easy 2 Installation Manual

Standalone Alarm System specific commands – Arming/Disarming
Command
ARM
DISARM
Gate opening, remote output control specific commands
Command
GATE
or
CONT
or
CTRL
GATERM
OUTON
OUTOF
or
OUTOFF

7.4 Examples for SMS command parameters

According to the SMS text message format standard, in one SMS message command you can
use max. 158 characters can be used in one SMS message.
Description
Arming the alarm status of the
Disarming the alarm status of the
Description
For affection of the command the added new phone number
will be recorded to the contact list into the argumented
position.
Values:
<n> position in the contact list (1 – 125). In case of '0' the
current number will be deleted.
phone number
The value can be added at here.
<phonenumber> - the
here. When it is already exists or the memory is full, then
there is no affection.
Hatására a megadott sorszámú hívószám törlődik a listából.
Value: <telefonszám> sequence number of the phone
number in the contact list (1-125)
When executing this command the given phone number will be
deleted from the contact list.
Gate opening
in Bi-stable mode: Relay contact will be closed (shortened)
in Mono-stable mode: Starts the timing
Gate closing
in Bi-stable mode: Relay contact will be opened
in Mono-stable mode: Stops the timing
77
Easy 2
(activates the arming)
Easy 2
phone number
value can be added