Serial Port Console Redirection - Supero X9DRL-EF User Manual

X9DRL-7F/X9DRL-EF Motherboard User's Manual
SOL (Serial_Over_LAN) Change Settings
This option specifies the base I/O port address and the Interrupt Request address of
Serial Port 2. The options are Auto, IO=3F8h; IRQ=4; IO=3F8h; IRQ=3; IO=2F8h;
IRQ=3; IO=3E8h; IRQ=5; IO=2E8h; IRQ=7; IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; and
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12.
SOL (Serial_Over_LAN) Device Mode
Use this feature to select the desired mode for the SOL port. The options are
Normal and High Speed.
Serial Port 2 Attribute
Use this feature to select the attribute for serial port 2. The options are SOL (Se-
rial_On_LAN), and COM.
Device Mode
Use this feature to select the desired mode for a serial port specified. The options
are Normal and High Speed.

Serial Port Console Redirection


These submenus allow the user to configure the following Console Redirection
settings for a COM Port 1 or COM Port 2 as specified by the user.
COM 1/SOL (Serial-Over-LAN)
COM1/SOL Console Redirection
Select Enabled to use COM Port1 or SOL Port for Console Redirection. The op-
tions are Enabled and Disabled. If this feature is set to enabled, the following
items will display.
Console Redirection Settings

This feature allows the user to specify how the host computer will exchange
data with the client computer, which is the remote computer used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII character set. Select VT100+
to add color and function key support. Select ANSI to use the extended ASCII
character set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are VT100, VT100+, VT-UTF8, and ANSI.
4-18