Boot Feature - Supero X9DRL-EF User Manual

X9DRL-7F/X9DRL-EF Motherboard User's Manual

Boot Feature


Quiet Boot
Use this feature to select the bootup screen display between POST messages or
the OEM logo. Select Disabled to display the POST messages. Select Enabled to
display the OEM logo. The default setting is Enabled.
AddOn ROM Display Mode
This sets the display mode for the Option ROM. Select Keep Current to use the cur-
rent AddOn ROM Display setting. Select Force BIOS to use the Option ROM display
mode set by the system BIOS. The options are Force BIOS and Keep Current.
Bootup Num-Lock
Use this feature to set the Power-on state for the Numlock key. The options are
Off and On.
Wait For 'F1' If Error
If this feature is set to Enabled, the system will wait until the 'F1' key is pressed
when an error occurs. The options are Disabled and Enabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles disk boot. When this item is set to
Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at boot up
and allow the drives that are attached to these host adaptors to function as bootable
disks. If this item is set to Disabled, the ROM BIOS of the host adaptors will not
capture Interrupt 19, and the drives attached to these adaptors will not function as
bootable devices. The options are Enabled and Disabled.
Re-try Boot
If this item is enabled, the BIOS will automatically reboot the system from a
specified boot device again after its initial boot failed. The options are Disabled,
Legacy Boot, and EFI Boot.
Power Configuration
Watch Dog Function
If enabled, the Watch Dog timer will reboot the system when it is not active for
more than 5 minutes. The options are Enabled and Disabled.
Power Button Function
If this feature is set to Instant Off, the system will power off immediately as soon
as the user presses the power button. Select 4 Second Override for the system
4-4