The WPCM450 communicates with onboard components via six SMBus interfaces,
PECI (Platform Environment Control Interface) buses, and General Purpose I/O
ports.
Other Features Supported by the WPCM450 BMC
Controller
The WPCM450 supports the following features:
•
IPMI 2.0
•
Serial over LAN
•
KVM over LAN
•
LAN Alerting-SNMP Trap
•
Event Log
•
X-Bus parallel interface for I/O expansion
•
Multiple ADC inputs, Analog and Digital Video outputs
•
SPI Flash Host BIOS and firmware bootstrap program supported
•
Reduced Media Independent Interface (RMII)
•
OS (Operating System) Independency
•
Provides remote Hardware Health Monitoring via IPMI. Key features
•
Provides Network Management Security via remote access/console redirection.
•
Supports the following Management tools: IPMIView, CLI (Command Line
Interface)
•
RMCP+ protocol supported
Note 1: For more information on IPMI configuration, please refer to the
IPMI User's Guide posted on our website at http://www.supermicro.com/
support/manuals/.
Note 2: The term "IPMI controller" and the term "BMC controller" can be
used interchangeably in this section.
1-15
Chapter 1: Overview