Table of Contents
Advertisement
Introduction
1.1
On the Operating Instructions
Purpose of the Operating Instructions
These operating instructions support you when commissioning networks with the media
converters of the SCALANCE X-100.
Validity of the Operating Instructions
These operating instructions are valid for the following devices:
Device
SCALANCE X101-1
SCALANCE X101-1LD
Further documentation
The "SIMATIC NET Industrial Ethernet Twisted Pair and Fiber Optic Networks" manual
contains additional information on other SIMATIC NET products that you can operate along
with the media converters of the SCALANCE X-100 product line in an Industrial Ethernet
network.
You can order the manual "SIMATIC NET Industrial Twisted Pair and Fiber Optic Networks",
release 05/2001, using the following order numbers:
6GK1970-1BA10-0AA0 German
6GK1970-1BA10-0AA1 English
6GK1970-1BA10-0AA2 French
6GK1970-1BA10-0AA4 Italian
You will also find this network manual on the Internet pages of Service & Support under the
following entry ID: 1172207 (http://support.automation.siemens.com/WW/view/en/1172207).
You will find further information in the "System Manual Industrial Ethernet" in the Manual
Collection.
You will find further information on the SCALANCE system on the Internet at
www.siemens.com/scalance (www.siemens.com/scalance).
You can obtain the "PROFINET Installation Guide" from the PROFIBUS User Organization
(PNO).
Audience
These Operating Instructions are intended for persons commissioning networks with
SCALANCE X-100 media converters.
SCALANCE X-100 media converter
Operating Instructions, 04/2016, C79000-G8976-C346-02
Article number
6GK5101-1BB00-2AA3
6GK5101-1BC00-2AA3
1
5
Hide quick links:
Advertisement
Table of Contents
