Siemens SCALANCE X101-1 Operating Instructions Manual page 9

Unpacking and checking
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to
the specification.
If you use damaged parts, this can lead to the following problems:
• Injury to persons
• Loss of the approvals
• Violation of the EMC regulations
• Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
Electrostatic discharge
NOTICE
Electrostatic sensitive devices (ESD)
Electronic modules contain electrostatic sensitive components
These components can easily be destroyed if handled incorrectly.
Note the following instructions to avoid damage.
• Touch electronic modules only when you absolutely need to work on them.
• If electronic modules need to be touched, the body of the person involved must first be
• Do not bring electronic modules in contact with electrically isolating materials such as
• Place the modules only on conductive surfaces.
• Pack, store and transport electronic modules and components only in conductive
SCALANCE X-100 media converter
Operating Instructions, 04/2016, C79000-G8976-C346-02
WARNING
electrostatically discharged and grounded.
plastic film, isolating table top pads or clothing made of synthetic fibers.
packaging such as metalized plastic or metal containers, conductive foam or household
aluminum foil.
Introduction
1.2 On the product
9