Eurotherm TC3001 User Manual page 63

Transit Inspector Pro
Working area consists of two tabs (see figure 37):
Original — image received from recognition camera (does not change during calibration process)
Transformed — image for visual camera calibration (changes during calibration process)
There are buttons to work with files and help buttons on the utility toolbar (figure 38).
Table 19: Camera Calibration Utility Toolbar
Buttons Description
Working with files
Open image: open image file.
Reset: reset calibration settings.
Load: load calibration settings.
Save: save calibration settings to the current XML file. If file is not set, new
window will appear to define its path and name.
Save as: save calibration settings to new XML file.
Help buttons
Grid: show distortion grid.
Guides: show guide lines.
Original image size, without scaling.
Stretch image vertically (for
Stretch image to fit.
64
Appendix C: Camera Calibration Utility
Figure 38: Camera Calibration Utility Toolbar
CIF 2
www.isscctv.com
User Guide
).