Distributed Server-Workstation Configuration - Eurotherm TC3001 User Manual

Transit Inspector Pro
Number detection and speed estimation
(see 4.2.3.2.1 Visually Setup Recognizer Parameters Utility
of number detection area.
8. Create the Transit: consolidation module object (see
page 37) with the following parameters:
Set the data sources.
Select the Main checkbox if the object is a closer one or Supplementary — if its results
go to another consolidator.
Define a database (the Database object) to write results (if the object is set as a main
consolidator).
9. Create the Computer object with ID equal to NetBIOS name of computer to be used as operator
workstation, and set the following parameter:
Network address
network.
10. Create Screen object.
11. Create Monitor object. In its properties window click
monitor. Set the parameters:
X — , Y —
0
12. Create Transit: operator GUI object. Set the following parameters:
Display settings
Monitor object to display operator interface.
Number window: X —
Protocol window: X —
Display ... last trains
Enable searching
Allow number editing
13. Launch SecurOS client on operator workstation and specify video server IP address (or
DNS/WINS name) when prompted.

4.3.3 Distributed Server-Workstation Configuration

1. Make sure that either the
file (in the
System32 drivers etc
connected in the network.
Note: To test name identification mechanism, run the ping command on operator workstation and set
the application server or video server name as a parameter. Check the network traffic between the
computers.
Administrating Module
IP address or DNS/WINS name of the computer within local TCP/IP
, W — , H — .
0 60 60
select recognizers to display its results. For each object set the
, Y — , W —
0 60
, Y — , W —
60 0
set number of trains to display in Protocol window.
select the checkbox to allow operator to search in database.
select the checkbox to allow operator to edit recognized number.
name identification mechanism is set in SecurOS or the
WINS
Windows system folder) is not empty on the workstations
www.isscctv.com
45
type in manually or set by the utility
on page 33) the parameters
4.2.5 Transit: consolidation module
button to assign all cameras to this
All
, H — ;
60 40
, H — ;
40 100
User Guide
on
hosts