Eurotherm TC3001 User Manual page 19

Transit Inspector Pro
4. If the same database has been found define the action over it (see figure 4). Otherwise proceed
to item 5.
Select one of the following option:
— use old PostgreSQL database from the previous Module installation on
Use database
this computer. Previous Module version must be correspondent to the current one to
guarantee correct database working.
Reinitialize (clean) database
would be deleted.
Click the Next button to continue (see item ??).
5. If the database was not found on the computer specify PostgreSQL superuser credentials (account
and password) necessary for creating Module database (see figure 8). Click the Next button to
continue.
6. Review your installation preferences and click the Back button to make changes, if necessary.
If everything is correct, click the Install button. The installation process will begin.
7. After the installation process has completed, a window will appear where you should click the
Finish button to exit the installation program.
If Setup Wizard asks you to restart the computer, select either to restart now, or restart the
computer later (in latter case you will need to restart computer manually before launching the
Module).
19
Deploying Module
— database will be reinitialized, all information in it
Figure 8: Database Creation
www.isscctv.com
User Guide