Eurotherm TC3001 User Manual page 33

Transit Inspector Pro
The utility window will appear (figure 24).
Figure 24: Visually setup recognizer parameters utility window
There is a list of JPEG files in the right part of the window, and the image is displays in the
left one.
Note: On the utility first run the lines ans rectangle coordinates is set due to the corresponding values
set in the Transit: number recognizer object properties window.
4. For each image set the wagon borders position by mouse and wight and height of the number
displayed area (a rectangle area), see figure 24.
5. Mark files to take into account for number displayed area calculus.
Click the Save & close to start calculus, save values and close the utility window.
Note: The setting are saved in the wagon utility setting.ini file in the exported files folder (see
item 3).
Click the Save button only to start calculus and save values.
Click the Close button to close the utility window without saving.
On closing the utility window the values will be set in the corresponding parameters of the object
settings automatically.
34
Administrating Module
www.isscctv.com
User Guide