Mask Search; Working In Number Window - Eurotherm TC3001 User Manual

Transit Inspector Pro
2. Select required direction check box/boxes.
3. Click Search button to begin search.
To search for carriage number by number:
1. Define the whole carriage number (or a part of it, see
information) in Wagon number field.
2. Click Search button to begin search.
To browse all database:
1. Make sure that all recognizers are set in Railways field (
recognizer are displaying). If it is needed add other manually.
2. Set total recognizer working time in Time field.
3. Make sure that all directions are set in Directions field (
directions are displaying). If it is needed add other manually.
4. Take wagon number field empty.
5. Click Search button to begin search.

5.1.2.1 Mask Search

One can set the whole carriage number or part of it in the Carriage Number field. On part carriage
number setting unrecognized symbols may be replaced by special symbols.
Table 13: Symbols for mask search
Symbol
(down accentuation
symbol)
(asterisk)
*
(percent symbol)
%

5.2 Working in Number Window

Number window displays recognized carriage number of the active record. This window consist of
the Number editable field.
56
Working with Module
Description
Any figure even unrecognized one (e. g.
One unrecognized figure (e. g.
Any amount of figures till the end of the number (e. g.
).
50318*%
www.isscctv.com
User Guide
5.1.2.1 Mask Search on page
message or a list of
All railways
message or a list of
All directions
).
514018 6
).
50318**1
56 for more
or
50%