Eurotherm TC3001 User Manual page 41

Transit Inspector Pro
4. Create Sensor object (see
condition on train passing by (on sensor applying for train partition).
5. Create Database object (see
records and retention period optionally.
6. Create the Transit: number recognizer object (see
with the following parameters:
Analyse video from camera
Synchronously record video from cameras
Video recording mode
Recognize numbers of wagons incoming from
the task.
Redirect results to
current recognizer is not a main one.
Number detection and speed estimation
(see 4.2.3.2.1 Visually Setup Recognizer Parameters Utility
of number detection area.
7. Create the Transit: assisting recognizer object (see
page 36) with the following parameters:
Analyse video from camera
Synchronously record video from cameras
Video recording mode
Recognize numbers of wagons incoming from
the task.
Redirect results to
current recognizer is not a main one.
Number detection and speed estimation
(see 4.2.3.2.1 Visually Setup Recognizer Parameters Utility
of number detection area.
8. Create the Transit: consolidation module object (see
page 37) with the following parameters:
Set the data sources.
Select the Main checkbox if the object is a closer one or Supplementary — if its results
go to another consolidator.
Define a database (the Database object) to write results (if the object is set as a main
consolidator).
9. Create Screen object.
10. Create Monitor object. In its properties window click
monitor. Set the parameters:
42
Administrating Module
4.2.3 Transit: number recognizer
4.2.2 Database on page 24). Define database for recognized number
4.2.3 Transit: number recognizer
define the corresponding Camera object.
select the proper recording mode.
define the Database object or enable the Consolidator field if the
define the corresponding Camera object.
select the proper recording mode.
define the Database object or enable the Consolidator field if the
www.isscctv.com
User Guide
on page 25) and define Alarm
define additional cameras to record video.
select the proper checkboxes due to
type in manually or set by the utility
on page 33) the parameters
4.2.4 Transit: assisting recognizer
define additional cameras to record video.
select the proper checkboxes due to
type in manually or set by the utility
on page 33) the parameters
4.2.5 Transit: consolidation module
button to assign all cameras to this
All
on page 25)
on
on