Configuration Examples; Standalone Configuration - Eurotherm TC3001 User Manual

Transit Inspector Pro

4.3 Configuration Examples

4.3.1 Standalone Configuration

1. Open Computer object properties (see
parameter:
Disks to store archive
for ).
C
2. Create Video Capture Device object (see
3. Create Camera object with the following parameters:
Channel number
is attached to.
Resolution
Pre-recording phase duration
41
Administrating Module
Figure 28: Object tree for standalone configuration
SecurOS Administration
set
Read/Write
SecurOS Administration
set the actual number of the labeled BNC connector the first camera
set value.
High (CIF2)
set approximate train passing time (s) by camera view.
www.isscctv.com
User Guide
Guide) and setup the following
access for video for at least one hard disk (e. g.
Guide).