Working With Protocol Tab Records; Working With Search Tab - Eurotherm TC3001 User Manual

Transit Inspector Pro

5.1.1.1 Working with Protocol Tab Records

To view frame associated with the carriage number (to select it), click it.
The corresponding carriage and train logs records will be marked. Monitor will enter the video
archive mode and will display a "stop frame" of the carriage corresponding to the carriage number.
The Number window will display this carriage number (see
page 56).
Note: If additional cameras was set for the analyse camera then all archives from the cameras are
supposed to be synchronized. One can manage synchronous playback by using playback controls of any
camera. See SecurOS User Guide
To browse/remove results from any recognizer, click its button. The button will be lighted.
Warning! Sort by recognizer cause output information difference only. All recognized carriage
numbers from all recognizers are gathered in database.

5.1.2 Working with Search Tab

Use Search tab to search carriage numbers in archive (e. g. by symbols, time interval, direction,
recognizer ID).
Note: All search parameters are optional. One can combine it anyhow.
There is Search form on the top of the tab, Search result is below it. Output records are sorted by
trains ID (for more information see
To browse all carriages, holding Ctrl keyboard button click any train log record.
53
Working with Module
for more information.
5.1 Working in Protocol Window
www.isscctv.com
User Guide
5.2 Working in Number Window
on page 49).
on