Installing The 1U Slim Rail Rack Mount Kit For Four-Post Racks (Xbr-000291); Installation Requirements; Time And Items Required - Brocade Communications Systems 6505 Hardware Installation Manual

FIGURE 13 Attaching the rear bracket to the device
3 Screws, 8-32 x 5/16-in., panhead Phillips
Installing the 1U Slim Rail Rack Mount Kit for Four-Post Racks
(XBR-000291)
Use the following instructions to install a fixed-port device in a slim rail four-post configuration using the Slim Rail Rack Mount Kit for
Four-Post Racks (XBR-000291). Any updates to these instructions will be added to the hardware installation guide for your product.
NOTE
Hardware devices illustrated in these procedures are only for reference and may not depict the device you are installing into the
rack.

Installation requirements

Review the installation and facility requirements for your product before mounting the device. Refer to the hardware installation guide for
your product for more information. Use Electronic Industries Association (EIA) standard racks.

Time and items required

Allow 15 to 30 minutes to complete this procedure.
36
Mounting the Device
Brocade 6505 Hardware Installation Guide
53-1002449-09