Chapter 1
Supported Accessories
The EP386 panel, shown in
DT9837C modules.
This RJ45 distribution panel contains four RJ45 connectors that are wired in parallel, making it
useful when attaching up to four DT9837A, DT9837B, or DT9837C modules together. Refer to
page 88
Note: You must have revision H or later of the DT9837A module or revision F or later of the
DT9837A-OEM module to be able to attach four modules together. You can identify the
revision of your module by looking at the serial number label on your module.
If you have revision G or earlier of the DT9837A or revision E or earlier of the
DT9837A-OEM, you can attach a maximum of two modules together.
24
Figure
Figure 5: EP386 Panel
for more information on using this panel.
5, is available for use with the DT9837A, DT9837B, and