Gate Input Connector
The 4-pin Gate Input connector is available on the DT9837A-OEM module only. (The DT9837B
module uses a BNC for the gate input signal).
Input connector on the DT9837A-OEM module.
Table 33
lists the pin assignments for the Gate Input connector on the DT9837A-OEM module.
Pin 3
Pin 4
Figure 28: Gate Input Connector
Table 33: Gate Input Connector Pin Assignments
Pin
1
Gate Input
2
No Connect
3
Digital Ground
4
No Connect
Connector Pin Assignments and LED Status Indicators
Figure 28
shows the orientation of the Gate
Pin 1
Pin 2
Description
133