All-in-one 15.6” wxga tft fanless multi-touch panel pc (60 pages)
Summary of Contents for AXIOMTEK PANEL5150-675
Page 1
PANEL5150-675 All-in-One 15.0” Super Slim PANEL PC User’s Manual...
Page 2
AXIOMTEK assumes no responsibility for any inaccuracies that may be contained in this document. AXIOMTEK makes no commitment to update or to keep current the information contained in this manual.
Page 3
Safety Approvals CE Marking FCC Class A FCC Compliance This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Safety Precautions Before getting started, read the following important cautions. 1. The PANEL5150-675 does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prevent static charge when installing the internal components.
Page 5
When handling boards and components, wear a wrist-grounding strap, available from most electronic component stores. Trademarks Acknowledgments AXIOMTEK is a trademark of AXIOMTEK Co., Ltd. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation. Intel and Pentium are trademarks of Intel Corporation.
C h a p t e r 1 Introduction ..........1 1 .1 G eneral Description ..........1 1 .2 S pecifications ............2 1 .2.1 C ore System for PANEL5150-675 SBC83675-based system ................2 1 .2.2 I /O System .............2 1 .2.3 B uilt-in Peripherals ..........3 1 .2.4...
Page 7
3 .2.3 D river Installation- DOS ........32 3 .2.4 D river Installation- Linux ........34 A p p e n d i x A SBC83675 BIOS Setup .....37 A .1 B IOS Introduction ..........37 A .2 B IOS Setup ............37 A .2.1 S tandard CMOS Setup ........39 A .2.2...
POI terminal, stand-alone KIOSK, medical instrument, mobile communication device and banking system - to name just a few. Designed by the Industrial PC experts, the PANEL5150-675 is virtually the ultimate one-step solution for your space-limited applications. Introduction...
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Specifications 1.2.1 Core System for PANEL5150-675 SBC83675-based system CPU: Intel Celeron 533MHz ~ 1.3G MHz; Intel Pentium III 550 ~ 1.4G MHz VIA Cyrix-III/C3 Family at 100/133MHz FSB System Chipset: VIA VT8606(Twist-T) + VT82C686B...
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual 1.2.4 System Specification 15.0” TFT with 1024 x 768 resolution NEMA 4/12 sealed front panel 24X slim type CD-ROM drive (Optional) Slim floppy disk drive Heat dispensing design Two free slots for PCI/ISA and ISA expansion, or two free slots for PCI/ISA and PCI expansion −...
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual Dimensions The following diagrams show the dimensions and outlines of PANEL5150-675. Introduction...
Page 14
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Introduction...
Page 15
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual Introduction...
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual I/O Outlets The following figure shows the I/O locations of the PANEL5150-675. Most of the I/O connectors are located on the back panel of the PANEL5150-675. CD-ROM COM1 Slim FDD COM2 Power Switch...
Installation Parallel Port The PANEL5150-675 has a Pentium III little board with a free ISA and PCI slots inside the riser card assembly. It already builds in a Pentium III CPU, relevant DRAM and a 3.5” HDD (or Dual 2.5” optional HDD).
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual CPU, HDD, and DRAM Installation The standard PANEL5150-675 system was designed Pentium III / Celeron level CPUs, and a 3.5” (or Dual 2.5”) hard disk drives. The build-in CPU board, SBC83675, provides one 168-pin DIMM socket that supports system memory up to 512MB.
Page 20
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual To separate carefully the OSD cable from the control board. System Installation...
Page 21
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Bracket DRAM System Installation...
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual FDD Installation When upgrading the CD-ROM or FDD, refer to the following illustration and instructions: 1. Remove the 3 screws securing the riser card assembly’s back cover. Take off the cover by sliding it outward and pulling it upwards as pointed by the arrows.
Page 23
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual To separate carefully the OSD cable from the control board. System Installation...
Page 24
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual System Installation...
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual CD-ROM Installation In order to reduce the unnecessary cost burden for the customer, AXIOMTEK offers the CD-ROM Kit as an optional accessory. Customer can install the CD-ROM by themselves with the following simple steps.
Page 26
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual System Installation...
Page 27
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Remove the 3 screws securing the riser card assembly’s back cover. Take off the cover by sliding it outward and pulling it upwards as pointed by the arrows. If your system does not come with a riser card assembly, proceed to step Another 6 screws , located on the upper perimeter (3) and...
Page 28
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual Connection to CD-ROM Connection to I/O Board System Installation...
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual 3 x Serial Ports The PANEL5150-675 provides four onboard serial ports installed on the back bottom side of the chassis. For systems, COM1 and COM2 are RS-232 and COM4 is RS-232/422/485. Each serial port is with...
The printer interface is a 25-pin D-SUB connector. To connect any parallel device, just plug in the device connector to the 25-pin D-SUB. The PANEL5150-675 has an analog RGB interface connector. It is able to connect to an expansion CRT monitor, and the system can display on both the flat panel and the CRT simultaneously.
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual Digital I/Os The PANEL5150-675 provides a digital I/O of 4-channel inputs/outputs for simple automation control. For example, it can be used to control the opening and closing of the cash drawer on a POS system. It can also be used for UPS control.
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual 2.10 Riser Card Assembly The PANEL5150-675 can be equipped with an optional riser card for PCI or ISA slots expansion. There are 2 riser card options available for PANEL5150-675, 1PCI/2ISA or 2PCI/2ISA. The riser card assembly directly plugs its riser card onto the PISA slot on SBC83675.
6. Slide the riser card assembly’s rear cover back into place. Screw the lid back to the main section by fastening 3 more screws located on top of the cover. 2.11 PS/2 Mouse The PANEL5150-675 has one PS/2 mouse connector. A simple plug-in will make the connection. System Installation...
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual C h a p t e r Driver Installation System PANEL5150-675 could support with Windows 95, Windows 98 or Windows 2000/XP. To facilitate installation system driver, you should read the instructions in this chapter carefully before you attempt installation.
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual 3.2.2 Driver Installation- Windows 98/2000/XP/CE.NET/XP-Embedded The touch screen of PANEL5150-675 provides a driver for use with Windows 95, Windows 98 or Windows 2000/XP. To facilitate installation of the touch screen driver, you should read the instructions in this chapter carefully before you attempt installation.
Page 39
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual Select the “Standard Calibrate” tab Calibration: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five points on screen for calibration. Press OK.
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual 3.2.3 Driver Installation- DOS Using “INSTALL.EXE” utility install PenMount software driver. Insert Driver CD and select the D:\P5150-675\Driver\Touch screen\DOS\ Install.exe Press ENTER key to install the drivers to drive C or use keyboard to key-in the hard disc drive that you plan to install the driver.
Page 41
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual C:\PENMOUNT\PMDETECT -N5 If you do not need to detect IRQ5 and IRQ9, the command is: C:\PENMOUNT\PMDETECT -N5 -N9 Do Calibration 1. To adjust the touch screen mapping properly to display screen, use PM.BAT (C:\PENMOUNT\PM) to do calibration. Choose “1”...
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual 3.2.4 Driver Installation- Linux Install PenMount driver Insert Driver CD and select the D:\P5150-675\Driver\Touch\Linux XFree86 4.x.x Driver V2.1\Driver\penmount_drv.o Follow the install procedure and press OK. Please reboot system. Click Start menu and select “PenMount Utilities”. You can see PenMount Control Panel Advance Setup Before install the Touch Screen Driver, please open the file in...
Page 43
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual 2. Key-in the following words. Setserial /dev/ttyS2 port 0x3e8 irq 10 (set COM3 as touch screen port) 3. Save and exit. 4. Please reboot. 5. After reset system, Insert Driver CD. Do Calibration Insert Driver CD and select the D:\P5150-675\Driver\Touch\Linux XFree86 4.x.x Driver V2.1\Calibration\ pencal-2.00...
Page 44
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual This page does not contain any information. Driver Installation...
A p p e n d i x SBC83675 BIOS Setup The board used in the PANEL5150-675 is SBC83675. The different settings available in the Award BIOS that comes with the SBC83675. Also contained here are instructions on how to set up the BIOS configuration.
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual A.2.1 Standard CMOS Setup “Standard CMOS Setup” is used to record some basic hardware configurations in the computer system and set the system clock and error handling. If the motherboard is already installed in a working system, there is no need to enter this option.
Page 48
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Date The date format is <day>, <date> <month> <year>. Press <F3> to show the calendar. The day of week, from Sun to Sat, determined by the BIOS, is read only The date, from 1 to 31 (or the maximum allowed in the date month), can key in the numerical / function key month...
Page 49
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual If there is no hard disk drive installed, select NONE and press <Enter>. SBC83675 SIOS Setup...
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Drive A type/Drive B type The category identifies the types of floppy disk drive A or drive B installed in the computer. None No floppy drive installed 360K, 5.25 in 5.25 inch PC-type standard drive; 360Kb capacity 5.25 inch AT-type high-density drive;...
Page 51
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual Halt On This field determines whether the system will halt if an error is detected during power up. The system boot will halt on any error No errors detected. (default) Whenever the BIOS detects a non-fatal...
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual A.2.2 Advanced BIOS Features This section is used to configure and improve the system and set up some system features according to the user’s preference. Phoenix – AwardBIOS CMOS Setup Utility Advanced BIOS Features Virus Warning Disabled Item Help...
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual Virus Warning This item protects the boot sector and partition table of the hard disk against accidental modifications. If an attempt is made, the BIOS will halt the system and display a warning message. If this occurs, the user can either continue the operation or run an anti-virus program to locate and remove the problem.
Page 54
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, CDROM, USB Floppy, USB CDROM ,USB HDD,and LAN. SBC83675 BIOS Setup...
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual Boot Other Device This item allows the user to enable/disable the boot device not listed on the First/Second/Third boot devices option above. The default setting is Enabled. Onboard Lan boot rom Choice Enable when you need boot on Lan Funtion ,Like PXE ,RPL …….
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Gate A20 Option The default value is “Fast”. The A20 signal is controlled by keyboard controller or Normal chipset hardware. Default: Fast. The A20 signal is controlled by Port 92 or Fast chipset specific method. Typematic Rate Setting This determines the typematic rate of the keyboard.
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Security Option This item limits the access to the system and Setup, or just to Setup. The default value is “Setup”. The system will not boot and access to Setup will be denied if System the incorrect password is entered at the prompt.
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual A.2.3 Advanced Chipset Features Since the features in this section are related to the chipset on the CPU board and are completely optimized, changing the default settings in this setup table are not recommended unless the user is well oriented with the chipset features.
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual DRAM Timing By SPD This item is selected depending on whether the board has paged DRAMs or EDO (extended data output) DRAMs. DRAM Clock The DRAM clock value is set depending on whether the board has paged DRAMs or EDO (extended data output) DRAMs.
Page 61
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual without any translation. The choice: 4M, 8M, 16M, 32M, 64M, 128M and 256M. SBC83675 SIOS Setup...
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual OnChip USB This should be enabled if the system has a USB installed on the system board and the USB will be used. Even when equipped, if a higher performance controller is added, this feature should be disabled. The choice: Enabled, Disabled.
Page 63
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual AGP Master 1 WS Read When “Enabled”, read to the AGP (Accelerated Graphics Port) are executed with one wait states. SBC83675 SIOS Setup...
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual A.2.4 Integrated Peripherals This option sets the hard disk configuration, mode and port. Phoenix – AwardBIOS CMOS Setup Utility Integrated Peripherals OnChip IDE Channel0 Enabled Item Help Enabled OnChip IDE Channel1 IDE Prefetch Mode Enabled Menu Level Primary Master PIO...
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual OnChip IDE Channel0 The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel separately. IDE Prefetch Mode The onboard IDE drive interfaces supports IDE prefetching for faster drive accesses.
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Onboard Serial Port 1/Port 2 Select an address and corresponding interrupt for the first and second serial ports. The options available are 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto. UART 2 Mode The second serial port offers these infrared interface modes: IrDA ASKIR IrDA-compliant serial infrared port Normal (default value)
Page 67
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual Parallel Port EPP Type Select EPP port type 1.7 or 1.9. SBC83675 SIOS Setup...
Page 68
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Onboard Serial Port 3 This item allows you to determine access onboard serial port 3 with which I/O address. The options available are 3F8H/2F8H/3E8H/2E8H/Disabled. Serial Port 3 Use IRQ Select an corresponding interrupt for the 3 serial port.
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual A.2.5 Power Management Setup The Power Management Setup is to save energy of the system effectively. It will shut down the hard disk and turn OFF video display after a period of inactivity.
Page 70
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Saving is not enabled, this will be preset to “No”. SBC83675 BIOS Setup...
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual Video Off Option When enabled, this feature allows the VGA adapter to operate in a power saving mode. Monitor will remain on during power saving Always On modes. Monitor blanked when the system enters the Suspend -->...
Page 72
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Soft-off by PWRBTN This only works with the system using an ATX power supply. It also allows user to define the type of soft power OFF sequence for the system to follow. This option follows the conventional manner systems perform Instant-Off when power is turned OFF.
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual A.2.6 PNP/PCI Configuration This section describes the PCI bus system configuration. PCI or Personal Computer Interconnect is a system which allows I/O devices to operate at speeds nearing the speed of the CPU when communicating with its own special components.
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Resource controlled by The Award Plug and Play BIOS has the capacity to automatically configure all of the boot and the Plug and Play compatible devices. However, this capability means absolutely nothing unless using a Plug and Play operating system such as Windows®98.
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual A.2.7 PC Health Status This section is to monitor the current hardware status of the CPU fan speeds and the core voltages. This is available only if there is hardware monitoring mechanism onboard.
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual A.2.9 Load Fail-Safe Defaults This option is to load the troubleshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high-performance features. Phoenix – AwardBIOS CMOS Setup Utility...
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual A.2.10 Set Supervisor/User Password Either supervisor or user password, or both of them can be set in this option. The differences between them are: supervisor password: can enter and change the options of the setup menus.
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual A.2.11 Save & Exit Setup This is to determine whether or not to accept the modifications. Typing “Y” quits the setup utility and saves all changes into the CMOS memory. Typing “N” brigs back to Setup utility. Phoenix –...
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual A.2.12 Exit Without Saving Select this option to exit the Setup utility without saving the changes made in this session. Typing “Y” will quit the Setup utility without saving the modifications. Typing “N” will return to Setup utility.
A p p e n d i x Power Supply Specifications The power supply used in the PANEL5150-675 is a 100W open frame power supply. The specifications and features of this special power supply are listed in the following sections.
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual B.1.3 General Specifications Efficiency: 80% typ. B.1.4 Environmental Specifications Operating temperature range: 0°C to 50°C Storage temperature range: -40°C to +85°C Humidity, non-condensing: 5% ~ 95% B.1.5 International Standards Safety Standards Designed to meet the following standards: UL 60950, CSA 22.2 NO.
PANEL5150-675 15.0” All-in-One PANEL PC User’s Manual B.2 Optional DC Power Supplies B.2.1 +18~56V 100W DC Power Supply Input Specifications Input voltage range: +18~56V Input current: 8A @ +18V max. Input protection: FUSE, 12A/125V. Output Specifications Load Range: MODEL NO.
Page 86
PANEL5150-671 15.1” All-in-One PANEL PC User’s Manual Short circuit protection: When output short to ground, the power supply will shutdown and auto recovery when fault condition has been removed. Over load protection: When output power over 115% to 180% of 100W, the power supply will shutdown and auto recovery when fault condition has been removed.
Need help?
Do you have a question about the PANEL5150-675 and is the answer not in the manual?
Questions and answers