AXIOMTEK P1157E-871 User Manual
  1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Touch Panel
  5. P1157E-871
  6. User manual

AXIOMTEK P1157E-871 User Manual

All-in-one 15” xga tft expandable panel pc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P1157E-871
All-in-One
15" XGA TFT Expandable
PANEL PC
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P1157E-871 and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK P1157E-871

Summary of Contents for AXIOMTEK P1157E-871

  • Page 1 P1157E-871 All-in-One 15” XGA TFT Expandable PANEL PC User’s Manual...

  • Page 2: Disclaimers

    Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.

  • Page 3: Safety Precautions

     When handling boards and components, wear a wrist-grounding strap, available from most electronic component stores. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. ® Windows is a trademark of Microsoft Corporation. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.

  • Page 4: Table Of Contents

    Table of Contents Disclaimers ..................... ii Safety Precautions ..................iii Chapter 1 Introduction ..........1 General Description ................1 Specifications ..................2 Dimensions and Outlines ..............4 I/O Outlets .................... 6 Packing List ..................7 Chapter 2 Hardware and Installation ...... 9 Open back cover ................
  • Page 5 Advanced Menu ................. 33 Chipset Menu ..................43 Boot Menu ..................47 Security Menu ..................48 Save & Exit Menu ................49 Chapter 4 Drivers Installation ......51 System ....................51 Touch Screen ..................51 Embedded O.S................... 54 APPENDIX A WATCHDOG TIMER ......
  • Page 6 This page is intentionally left blank.

  • Page 7: Chapter 1 Introduction

    Therefore, P1157E-871 is especially suitable for most rugged industrial environments. Expandable for 2 PCIe (2 PCI optional) P1157E-871 has 2 PCIe (2 PCI optional) for expansion purpose. User can easily plug in standard half-size PCI or PCIe card for any requirement.

  • Page 8: Specifications

    P1157E-871 User’s Manual Powerful computing: Intel® 3rd Generation Core i7/i5/i3/Celeron processors ® ® ® Core™ i7/i5/i3 series, Pentium P1157E-871 features Intel &2 and Celeron processors ® and Intel C216/Q77 chipset which deliver high computing performance capability. Ivy Bridge CPU offers reliable and stable performance and rugged environment.
  • Page 9 P1157E-871 User’s Manual System Specification  15” XGA(1024 X 768)LCD  5 wired resistive Touch  IP65/NEMA4 aluminum front bezel  IP65 aluminum front bezel  Net Weight  6.2 Kgs (13.67 lb)  Dimension (Main Body Size)  378 x 125 x 309mm ...

  • Page 10: Dimensions And Outlines

    P1157E-871 User’s Manual Dimensions and Outlines The following diagrams show the dimensions and outlines of P1157E-871. Introduction...
  • Page 11 P1157E-871 User’s Manual Introduction...

  • Page 12: I/O Outlets

    P1157E-871 User’s Manual I/O Outlets Please refer to the following illustration for I/O locations of the P1157E-871. Function 1 x RS-232/422/485 with 5V&12V (COM1) 1 x DVI-I 2 x RJ45 for GIGA Ethernet 1 x Line-out 1 x RS-232 with 5V&12V (COM3) 2 x USB2.0...

  • Page 13: Packing List

    Wall/VESA mount kit x 1 (optional)  Rack mount kit x 1 (optional)  Power cord x 1  DVI to VGA adaptor If you can not find the package or any items are missing, please contact Axiomtek distributors immediately. Introduction...
  • Page 14 P1157E-871 User’s Manual This page is intentionally left blank. Introduction...

  • Page 15: Hardware And Installation

    P1157E-871 User’s Manual Chapter 2 Hardware and Installation The P1157E-871 provides rich I/O ports and flexible expansions for you to meet different demand. The chapter will show you how to install the hardware. It includes:  Open back cover ...

  • Page 16: Open

    P1157E-871 User’s Manual Open back cover This section tells users how to open back cover. Please follow the steps below. Step 1 Unscrew 3 screws on the back cover and push to the right side. Please refer the photo below.

  • Page 17: Serial Ports Interface

    P1157E-871 User’s Manual Serial Ports Interface The P1157E-871 has four serial ports. COM1 is RS-232/422/485, while COM2, COM3 and COM4 are RS-232. The following table shows you the pin assignments of this connector: 2.2.1 COM1 Data/Power Selection (JP10) The COM1 port has +5V level power capability on DCD and +12V level on RI by setting this jumper.

  • Page 18: Com1&Com2 Connector

    P1157E-871 User’s Manual 2.2.4 COM1&COM2 Connector The CN15 is a double-deck DB-9 connector. The upper connector (CN15A) is for COM1 and the lower connector (CN15B) is for COM2. Note that the connectors (CN13 and CN15A) come with power capability on DCD and RI pins by setting jumpers (see section 2.2.1).

  • Page 19: Ethernet

    P1157E-871 User’s Manual Ethernet The P1157E-871 is equipped with two high performance plug and play Ethernet interfaces (RJ-45) which are fully compliant with the IEEE 802.3 standard. Connection can be established by plugging one end of the Ethernet cable into this RJ-45 connector and the other end to a 1000/100/10-Base-T hub.

  • Page 20: Mountings: Panel / Wall / Rack / Desktop / Vesa

    2.4.1 VESA-ARM / Wall-Mount / Desktop-mount The P1157E-871 provides VESA mount: 75x75 mm or 100x100mm. Screw six screws to fix the kit in the back chassis. ▲VESA/ Wall mount bracket ▲Putting the bracket on the back of system...

  • Page 21: Panel-Mount Kit Assembly

    ▲Fixing the bracket by six screws on the left and right side. 2.4.2 Panel-mount Kit Assembly The P1157E-871 is designed for panel mount application. To mount the P1157E-871, the standard set of mounting kit (included in the system packaging) is needed. Hardware and Installation...

  • Page 22: Rack-Mount Kit Assembly

    P1157E-871 User’s Manual 2.4.3 Rack-mount Kit Assembly The P1157E-871 is designed for rack mount application. To mount the P1177S-871, the standard set of mounting kit (included in the system packaging) is needed. Step 1 Unscrew the four screws from the left and right side of the system.

  • Page 23: Hdd Installation

    P1157E-871 User’s Manual HDD Installation The P1157E-871 provides a convenient Hard Disk Drive (HDD) bracket for users to install 2 x 2.5” or 1 x 3.5” SATA HDD. Please follow the steps: Step 1 Refer section 2.1 to open the back cover.
  • Page 24 P1157E-871 User’s Manual Step 4 Fix the HDD bracket into the main base. Step 5 Plug the power and SATA cables to connectors. Installation completes. Hardware and Installation...

  • Page 25: Dram Installation

    P1157E-871 User’s Manual DRAM Installation The P1157E-871 provides two 204-pin DDR3 SO-DIMM socket that support system memory up to 16GB. Please follow steps below to install the memory modules: Step 1 Refer to section 2.1 to open the back cover and find out DIMM socket on mainboard (MANO871).
  • Page 26 P1157E-871 User’s Manual Step 3 Install the SO-DIMM module into the slot and press it firmly down until it seats correctly. Step 4 The slot latches are levered upwards and latch on to the edges of the SO-DIMM. Hardware and Installation...

  • Page 27: Cpu Installation

    P1157E-871 User’s Manual CPU Installation ® Core™ i7/i5/i3 series, The P1157E-871 has an LGA1155 socket supporting Intel &2 ® ® Pentium and Celeron processors and provides high computing performance for users. Note: Before maintaining CPU, please remove the CD-ROM and cooler first.
  • Page 28 P1157E-871 User’s Manual Step 3 CPU aims at the socket and places the package carefully into the socket by purely vertical motion. NOTE Never touch fragile socket contacts to avoid damage and do not touch processor sensitive contacts at any time during installation.

  • Page 29: Cpu Cooler Installation

    P1157E-871 User’s Manual CPU Cooler Installation Note: Before maintaining CPU cooler, please remove the CD-ROM and cooler first. Step 1 Making sure your CPU settled correctly on the socket. Step 2 Screw the cooling fan supporting base onto the CPU socket on the Motherboard and make sure the CPU fan is plugged to the CPU fan connector.

  • Page 30: Wireless Lan Module Installation (Optional)

    P1157E-871 User’s Manual Wireless LAN Module Installation (optional) The P1157E-871 provides one wireless LAN module to install. When installing the wireless LAN module, refer to the following instructions and illustration: Step 1 Refer to section 2.1 to open the back cover and find out the wireless LAN module located.
  • Page 31 P1157E-871 User’s Manual Step 3 Plug in USB cable to the connector of WIFI module. And, find the built-in Antenna cable and connect it wireless LAN card. Step 4 Lift the rubber stopper from the top of back cover. Step 5 Install the antenna on the antenna connector.

  • Page 32: Add-On Card Installation

    2.10 Add-on Card Installation The P1157E-871 provides a riser card (PCIex16 interface) for 2 x PCIe x 8 or 2 x PCI slots expansion. The riser card assembly can accommodate both half-size expansion cards. To install the riser card, refer to the following figure and instructions below: Step 1 Refer section 2.1 to open the back cover.
  • Page 33 P1157E-871 User’s Manual Step 4 Secure the metal bracket of the card to the system case with four screws. Installations complete. Note: Please use the standard size of add-on card to avoid conflicting the mechanism. Hardware and Installation...

  • Page 34: Optical Drive Installation(Optional)

    P1157E-871 User’s Manual 2.11 Optical Drive Installation(optional) The P1157E-871 offers a convenient drive bay module for users to install optical drive. When installing the optical drive, refer to the following instructions and illustration: Step 1 Refer section 2.1 to open the back cover.
  • Page 35 P1157E-871 User’s Manual Step 4 Fixing the optical drive kit on the chassis by 4 screws. Step 5 Plug the power and SATA cables to connectors. Installation completes. Hardware and Installation...
  • Page 36 P1157E-871 User’s Manual This page is intentionally left blank. Hardware and Installation...

  • Page 37: Ami Bios Setup Utility

    P1157E-871 User’s Manual Chapter 3 AMI BIOS Setup Utility The AMI UEFI BIOS provides users with a built-in setup program to modify basic system configuration. All configured parameters are stored in a flash chip to save the setup information whenever the power is turned off. This chapter provides users with detailed description about how to set up basic system configuration through the AMI BIOS setup utility.

  • Page 38: Main Menu

    P1157E-871 User’s Manual Main Menu When you first enter the Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. There are two Main Setup options. They are described in this section. The Main BIOS Setup screen is shown below System Date/Time Use this option to change the system time and date.

  • Page 39: Advanced Menu

    P1157E-871 User’s Manual Advanced Menu The Advanced menu also allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus: ►...
  • Page 40 P1157E-871 User’s Manual  ACPI Settings You can use this screen to select options for the ACPI Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 41 P1157E-871 User’s Manual  Trusted Computing This screen provides function for specifying the TPM settings. Security Device Support Use this item to enable or disable BIOS support for security device. If you enable BIOS support for security device, please install the driver as well.
  • Page 42 P1157E-871 User’s Manual  CPU Configuration This screen shows the CPU information. EIST ® Enable or disable Intel Speed Step. When enabled, CPU speed is controlled by the operating system. When disabled, CPU runs at its default speed. Turbo Mode This item is for enabling or disabling turbo mode.
  • Page 43 P1157E-871 User’s Manual  SATA Configuration. In this Configuration menu, you can see the currently installed hardware in the SATA ports. During system boot up, the BIOS automatically detects the presence of SATA devices. SATA Controller(s) Enable or disable SATA device.
  • Page 44 P1157E-871 User’s Manual  PCH-FW Configuration This screen displays Management Engine (ME) Firmware information. AMI BIOS Setup Utility...
  • Page 45 P1157E-871 User’s Manual  AMT Configuration Use this screen to configure AMT parameters. Intel AMT ® Enable or disable Intel Active Management Technology BIOS Extension. Disable ME Enable or disable ME functionality. AMI BIOS Setup Utility...
  • Page 46 P1157E-871 User’s Manual  USB Configuration You can use this screen to select options for the USB Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 47 P1157E-871 User’s Manual  NCT6627UD Super IO Configuration You can use this screen to select options for the Super IO Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 48 P1157E-871 User’s Manual  NCT6627UD HW Monitor Use this screen for Smart Fan configuration and hardware health status monitoring. This screen displays the temperature of system and CPU, cooling fan speed in RPM and system voltages (VCORE, +12V, +3.3V and +5V).

  • Page 49: Chipset Menu

    P1157E-871 User’s Manual Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: ► PCH-IO Configuration ►...
  • Page 50 P1157E-871 User’s Manual  PCH-IO Configuration This screen allows you to set PCH parameters. USB Configuration Use this item for USB configuration settings. PCH Azalia Configuration Use this item for PCH Azalia configuration settings. Launch PXE OpROM policy Control the execution of UEFI and Legacy PXE OpROM.
  • Page 51 P1157E-871 User’s Manual  System Agent (SA) Configuration This screen shows System Agent information and provides function for specifying related parameters. For items marked with “”, please press <Enter> for more options. VT-d ® Enable or disable Intel chipset virtualization technology for directed I/O. VT-d can help end users improve security and reliability of the systems and also improve performance of I/O devices in virtualized environment.
  • Page 52 P1157E-871 User’s Manual  Graphics Configuration Primary Display Allow you to select which graphics controller to use as the primary boot device. Primary IGFX Boot Display Allow you to select the display device which will be activated during POST. This has no effect if external graphics present.

  • Page 53: Boot Menu

    P1157E-871 User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Bootup NumLock State Use this item to select the power-on state for the keyboard NumLock.

  • Page 54: Security Menu

    P1157E-871 User’s Manual Security Menu The Security menu allows users to change the security settings for the system. Administrator Password This item indicates whether an administrator password has been set (installed or uninstalled). User Password This item indicates whether an user password has been set (installed or uninstalled).

  • Page 55: Save & Exit Menu

    P1157E-871 User’s Manual Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or fail-safe default values. Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and reboot the computer so the new system configuration parameters can take effect.
  • Page 56 P1157E-871 User’s Manual Discard Changes Select this option to quit Setup without making any permanent changes to the system configuration. Select Discard Changes from the Save & Exit menu and press <Enter>. Select Yes to discard changes. Restore Defaults It automatically sets all Setup options to a complete set of default settings when you select this option.

  • Page 57: Chapter 4 Drivers Installation

    P1157E-871 User’s Manual Chapter 4 Drivers Installation System P1157E-871 supports Windows 7 and WES 7. To facilitate the installation of system driver, please carefully read the instructions in this chapter before start installing. Insert Driver CD and select the “\Drivers”. Step 1 Step 2 Select all files and follow the installing procedure.
  • Page 58  Driver Installation- Windows 7 The P1157E-871 provides a touch screen driver that users can install it under the operating system Windows 7. To facilitate installation of the touch screen driver, you should read the instructions in this chapter carefully before you attempt installation.
  • Page 59 P1157E-871 User’s Manual Select the “Standard Calibrate” tab. Step 4 Step 5 Calibrations: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five points on screen for calibration. Step 6 Press OK.

  • Page 60: Embedded O.s

    P1157E-871 User’s Manual Embedded O.S. The P1157E-871 provides the Windows 7 Embedded. The O.S. is supported devices which are listed below.  WES 7 Here are supported onboard devices:  Onboard Multi I/O  SATA HDD   PS2 Keyboard and mouse ...

  • Page 61: Appendix Awatchdog Timer

    P1157E-871 User’s Manual APPENDIX A WATCHDOG TIMER About Watchdog Timer After the system stops working for a while, it can be auto-reset by the watchdog timer. The integrated watchdog timer can be set up in the system reset mode by program.
  • Page 62 P1157E-871 User’s Manual  Program Example 2E, 87 2E, 87 2E, 07 Logical Device 8 2F, 08 Activate 2E, 30 2F, 01 2E, F5 2F, N Set Minute or Second; N=08 (Min), 00(Sec) 2E, F6 2F, M Set Value; M=00~FF Note: If N=00h, the time base is set to second.

  • Page 63: Appendix Bintel® Iamt Settings

    P1157E-871 User’s Manual APPENDIX B INTEL® IAMT SETTINGS ® ® The Intel Active Management Technology (Intel iAMT) has decreased a major barrier to IT efficiency that uses built-in platform capabilities and popular third-party management and security applications to allow IT a better discovering, healing, and protection their networked computing assets.

  • Page 64: Set And Change Password

    P1157E-871 User’s Manual Set and Change Password You will be asked to set a password when first log in. The default password is “admin”. You will be asked to change the password before setting ME. Intel® IAMT Settings...

  • Page 65: Intel ® Iamt Web Console

    P1157E-871 User’s Manual You must confirm your new password while revising. The new password must contain: (example: !!11qqQQ) (default value).  Eight characters  One upper case  One lower case  One number One special symbol, such as ! 、 $ or ; ， (、 " , excepted) ...
  • Page 66 P1157E-871 User’s Manual Enter the iAMT Web. Click Remote Control, and select commands on the right side. When you have finished using the iAMT Web console, close the Web browser. Intel® IAMT Settings...

Table of Contents