All-in-one 15.6” wxga tft fanless multi-touch panel pc (60 pages)
Summary of Contents for AXIOMTEK PANEL1127-671
Page 1
PANEL1127-671 All-in-One 12.1” Super Slim PANEL PC User’s Manual...
Page 2
AXIOMTEK assumes no responsibility for any inaccuracies that may be contained in this document. AXIOMTEK makes no commitment to update or to keep current the information contained in this manual.
Page 3
Safety Approvals CE Marking FCC Class A FCC Compliance This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Safety Precautions Before getting started, read the following important cautions. 1. The PANEL1127-671 does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prevent static charge when installing the internal components.
Page 5
When handling boards and components, wear a wrist-grounding strap, available from most electronic component stores. Trademarks Acknowledgments AXIOMTEK is a trademark of AXIOMTEK Co., Ltd. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation. Intel and Pentium are trademarks of Intel Corporation.
Page 6
This page does not contain any information.
System Specification Utilities Supported Dimensions General Description The PANEL1127-671 super slim industrial PANEL PC is mainly designed for industrial automation and some space-constricted embedded applications. For some space-concerned industries, a traditional PC with a separate main system, display monitor and keyboard is simply not integrated enough.
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual Specifications 1.2.1 Core System for PANEL 1127-671 system with SBC83671 CPU: Intel Celeron 533MHz ~ 1.3G MHz; Intel Pentium III 550 ~ 1.4G MHz VIA Cyrix-III/C3 Family at 100/133MHz FSB System Chipset: VIA VT82C694T,VT82C686B with integrated...
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual 1.2.4 System Specification 12.1” TFT with 800x 600 resolution NEMA 4/12 sealed front panel 24X slim type CD-ROM drive Heat dispensing design PC/104 expansion Bus Option One free slot for PCI/ISA expansion Net weight: −...
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual Dimensions The following diagrams show the dimensions and outlines of PANEL1127-671. Introduction...
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual I/O Outlets The following figure shows the I/O arrangement of the PANEL1127-671. The backside of the chassis contains most of the connectors. 24x CD-ROM COM2 port Ethernet RJ45 phone jack COM1 port PS/2 Mouse connector...
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual C h a p t e r System Configuration System Configuration 2.1.1 Front View The figure below shows the front views of PANEL1127-671. 1. Power LED 2. HDD LED 3. Ethernet LED System Configuration...
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual Panel Mount The PANEL1127-671 is mainly designed for panel mount application. To mount the PANEL1127-671, the standard set of mounting kit (included in the system packaging) is needed. Please refer to the following figure.
Installation Parallel Port The PANEL1127-671 has a Pentium III little board with a free ISA and PCI slots inside the riser card assembly. It already builds in a Pentium III CPU, relevant DRAM and a 3.5” HDD.These are all standard and the system is ready to play.
CPU, HDD, DRAM and Riser Card Installation The standard PANEL1127-671 system already builds in a Pentium III CPU, and a 3.5” hard disk drive. SBC83671, on the one hand, provide one 168-pin DIMM socket that supports system memory up to 512MB.
Page 21
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual 3. To remove 4 more screws for the HDD installation. 4. After making the necessary upgrades or modifications to your HDD, CPU, and DRAM, restore the system back to its original form by following instructions 4 to 1.
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual 3 x Serial Ports The PANEL1127-671 provides four onboard serial ports installed on the back bottom side of the chassis. For systems, COM1 and COM2 are RS-232 and COM4 is RS-232/422/485. Each serial port is with...
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual The PANEL1127-671 has an analog RGB interface connector. It is able to connect to an expansion CRT monitor, and the system can display on both the flat panel and the CRT simultaneously. Ethernet The PANEL1127-671 provides an NE2000 compatible Ethernet (RJ-45) interface.
The PANEL1127-671 provides a standard PS/2 keyboard connector. If the user would like to use AT keyboard interface, a conversion cable is also provided to make this connection. PS/2 Mouse The PANEL1127-671 has one PS/2 mouse connector. A simple plug-in will make the connection. System Installation...
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual System O/S and Software Installation The PANEL1127-671 is not equipped with any operating system. It builds in a 3.5” HDD and 1.5MB Solid State Disk as memory storage device. As both devices are built in the system chassis, to load any O/S or application software into the computer, an external device is needed to act as a bridge.
Page 26
This page does not contain any information.
A p p e n d i x Power Supply Specifications The power supply used in the PANEL1127-671 is a 100W open frame power supply. The specifications and features of this special power supply are listed in the following sections.
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual Environmental Specifications Operating temperature range: 0°C to 50°C Storage temperature range: -40°C to +85°C Humidity, non-condensing: 5% ~ 95% Altitude: 0 to 10,000 feet International Standards Safety Standards Designed to meet the following standards: UL 1950, CSA 22.2 NO.
Page 29
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual Optional DC Power Supplies +18~56V 100W DC Power Supply Input Specifications Input voltage range: +18~56V Input current: 8A @ +18V max. Input protection: FUSE,12A/125V. Output Specifications Load Range: MODEL NO. SDU-100BQ1 INPUT VOLTAGE...
Page 30
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual Short circuit protection: When output short to ground, the power supply will shutdown and auto recovery when fault condition has been removed. Over load protection: When output power over 115% to 180% of 100W,...
Page 31
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual EN 50082-1 (1997) immunity standard: EN 61000-4-2 : 1995 ESD STANDARD. EN 61000-4-3 : 1996 RS STANDARD. EN 61000-4-4 : 1995 EFT STANDARD. EN 61000-4-5 : 1995 SURGE STANDARD. EN 61000-4-6 : 1996 CS STANDARD.
Page 32
This page does not contain any information.
PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual A p p e n d i x General Care & Maintenance Aside from the Safety Precautions listed on the front of this User’s Manual, listed in this appendix are some more additional reminders and measures users must take when cleaning the LCD panel of PANEL1127-671.
Page 34
This page does not contain any information.
Need help?
Do you have a question about the PANEL1127-671 and is the answer not in the manual?
Questions and answers