Attaching The Rack-Mount Brackets - Cisco Catalyst 9300 Series Hardware Installation Manual

Rack-Mounting
1 19-inch brackets (RACK-KIT-T1=)
2 Extension rails and brackets for four-point
mounting, includes 19-inch brackets
(4PT-KIT-T1=)
3 ETSI brackets (RACK-KIT-T1=)

Attaching the Rack-Mount Brackets

Procedure
Use four Phillips flat-head screws to attach the long side of the bracket to each side of the switch for the front-
or rear-mounting positions.
Figure 21: Attaching Brackets for 19-inch Racks
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
32
4 23-inch brackets (RACK-KIT-T1=)
5 24-inch brackets (RACK-KIT-T1=)
Switch Installation