Switch Installation; Preparing For Installation; Safety Warnings - Cisco Catalyst 9300 Series Hardware Installation Manual

Switch Installation

For initial switch setup, assigning the switch IP address, and powering on information, see the switch getting
started guide on Cisco.com.
This chapter contains these topics:
•
•
•
•
•
•
•
•
•
•
•

Preparing for Installation

Safety Warnings

This section includes the basic installation caution and warning statements. Read this section before you start
the installation procedure. Translations of the warning statements appear in the Regulatory Compliance and
Safety Information guide on Cisco.com.
Preparing for Installation, page 19
Planning a Switch Data Stack, page 24
Data Stack Cabling Configurations, page 24
Planning a StackPower Stack, page 27
StackPower Cabling Configurations, page 28
Installing the Switch, page 30
Connecting to the StackWise Ports, page 34
Connecting to the StackPower Ports, page 36
Installing a Network Module in the Switch, page 36
Installing and Removing SFP, SFP+ and QSFP+ Modules, page 36
Connecting Devices to the Ethernet Ports, page 37
C H A P T E R
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
2
19