Shipping Box Contents - Cisco Catalyst 9300 Series Hardware Installation Manual

Shipping Box Contents

• Temperature around the unit does not exceed 113°F (45°C). If the switch is installed in a closed or
• Humidity around the switch does not exceed 95 percent.
• Altitude at the installation site is not greater than 10,000 feet.
• Cooling mechanisms, such as fans and blowers in the switch, can draw dust and other particles causing
Shipping Box Contents
The shipping box contains the model of the switch you ordered and other components needed for installation.
Some components are optional, depending on your order.
Note Verify that you have received these items. If any item is missing or damaged, contact your Cisco
representative or reseller for instructions. Verify that you have received these items. If any item is missing
or damaged, contact your Cisco representative or reseller for instructions.
Figure 8: Components delivered in the shipping box
1
2
3
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
22
multirack assembly, the temperature around it might be greater than normal room temperature.
contaminant buildup inside the chassis, which can result in system malfunction. You must install this
equipment in an environment as free from dust and foreign conductive material (such as metal flakes
from construction activities) as is possible.
Cisco Catalyst 9300 Series switch with
optional network module
(power supply and fan modules not
shown)
AC power cord
Product documentation and compliance
document
9
Footnote.
6
10
11
Switch Installation
Eight number-8 Phillips flat-head screws
Cable guide
M4.0 x 20mm Phillips pan-head screw