After Switch Installation; Connecting To The Stackwise Ports - Cisco Catalyst 9300 Series Hardware Installation Manual

After Switch Installation

After Switch Installation
• Configure the switch. For more information, see
• Connect to the stack ports.
• Install the power cord retainer (optional).
• Connect to the front-panel ports.

Connecting to the StackWise Ports

Before You Begin
Before connecting the StackWise cables, review the
a Cisco-approved StackWise cable to connect the switches.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
34
Setting up the Switch, on page
Planning a Switch Data Stack, on page
Switch Installation
65.
24. Always use