Mounting The Switch A Rack; Installing The Switch On A Table Or Shelf - Cisco Catalyst 9300 Series Hardware Installation Manual

Switch Installation

Mounting the Switch a Rack

Procedure
Step 1
Use the four supplied Phillips machine screws to attach the brackets to the rack.
Step 2 Use the black Phillips machine screw to attach the cable guide to the left or right bracket.
Figure 22: Mounting the Switch in a Rack
1
2

Installing the Switch on a Table or Shelf

Procedure
Step 1 To install the switch on a table or shelf, locate the adhesive strip with the rubber feet in the mounting-kit
envelope.
Step 2 Attach the four rubber feet to the four circular etches on the bottom of the chassis.
Step 3 Place the switch on the table or shelf near an AC power source.
Step 4 When you complete the switch installation, see
switch configuration.
Phillips machine screw, black
Cable guide
Installing the Switch on a Table or Shelf
3 Front-mounting position
4 Number-12 or number-10 Phillips machine
screws
After Switch Installation, on page
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
34for information on
33