Qsan XS5224D User Manual page 92

UPS Battery
Level
UPS
Manufacturer
UPS Model
Options of UPS Settings
The options available in this tab:
Enable UPS Support: Check to enable UPS supported. Now we support network UPS via

SNMP, Serial UPS with COM port, and USB UPS.
 Communication Type: Now we support network UPS via SNMP, Serial UPS with COM
port, and USB UPS.
Shutdown battery Level: If the power is shortage, the system will execute shutdown

process when reaching the UPS battery level.
If Communication Type selects SNMP:
 SNMP IP Address: Enter the IP address of the network UPS via SNMP.
SNMP Version: Select SNMP supported versions: v1, v2c, or v3. Please enter community

if select SNMP v1 or v2c. If select SNMP v3, it needs more options for authentication.
Please enter a username, check to use authentication if necessary, select an
authentication protocol and enter an authentication password, check to use privacy if
necessary, the privacy protocol supports DES, and enter a privacy password.
If Communication Type selects Serial:
 UPS Manufacturer: Select the UPS manufacture.
UPS Model: Select the UPS model.

When finished, click the Apply button to take effect.
70 ©
Copyright 2017 QSAN Technology, Inc. All Right Reserved.
maintenance.
Offline: UPS is offline and is not supplying power to the load.

Overloaded: UPS is overloaded. You plugged more equipments

into the UPS than it was designed to handle.
 Forced Shutdown: Forced shutdown the UPS.
The battery level of the UPS.
The manufacturer of the UPS.
The model of the UPS.