Qsan XS5224D User Manual page 329

2. You must use terminal software such as HyperTerminal or Putty to open the console
after the connection is made.
INFORMATION:
For more information about terminal software, please refer to
HyperTerminal:
PuTTY:
3. Here we first demonstrate HyperTerminal. The console settings are on the following.
Baud rate: 115200, 8 data bit, no parity, 1 stop bit, and no flow control
Terminal type: vt100
http://www.hilgraeve.com/hyperterminal/
http://www.putty.org/
Support and Other Resources
307