Qsan XS5224D User Manual page 51

The maximum length of the snapshot name is 32
characters. Valid characters are [ A~Z | a~z | 0~9 | -_<> ].
Schedule Snapshots: (optional)
Define the cycle of snapshots.
11. Local Clone Configuration
Item
Source Volume Name:
Select one of created volume for source.
Source Volume Capacity:
Check the capacity of source volume.
Target Volume Name:
Select one of created volume for target.
Target Volume Capacity:
Check the capacity of target volume.
Schedule Local Clones: (optional)
Define the cycle of local clones.
12. Remote Replication Configuration
Item
Source Volume Name:
Select one of created volume for source.
Source Volume Capacity:
Check the capacity of source volume.
Source iSCSI Port:
iSCSI port of source unit. It can be auto or dedicated iSCSI
port.
Target iSCSI Port IP Addresses:
iSCSI port IP addresses of target unit.
Target Controller 1
IP Address 10.10.100.1
Target CHAP Username: (optional)
CHAP (Challenge-Handshake Authentication Protocol)
username. The maximum length of the username is 223
characters. Valid characters are [ A~Z | a~z | 0~9 |
~!@#%^&*_-+=|(){}[]:;<>.?/ ].
Target CHAP Password: (optional)
CHAP (Challenge-Handshake Authentication Protocol)
password. The length of the password is between 12 to 16
Daily 00:00
Value
V1-PL1
8TB
T1-PL1
8TB
Daily 01:00
Value
V1-PL1
8TB
Auto
Controller 2 (optional)
10.10.101.1
chap2
123456789012
Prepare for Installation
29