Qsan XS5224D User Manual page 105

Reset to Defaults: Click the Reset button to progress reset to defaults and force a

reboot. The default settings are:
。 Reset Management Port IP address to DHCP, and then fix IP address:
169.254.1.234/16.
。 Reset admin's Password to 1234.
。 Reset System Name to model name plus the last 6 digits of serial number. For
example: XS5216-123456.
。 Reset IP addresses of all iSCSI Ports to 192.168.1.1, 192.168.2.1, ... etc.
。 Reset link speed of all Fibre Channel Ports to Automatic.
。 Clear all access control settings of the host connectivity.
CAUTION:
Process the Reset to Defaults function will force a reboot.
Clean Expansion Enclosure ID: Click the Clean button to clean all configurations of

expansion enclosure ID. A clean will cause the system shutdown, and then you have to
start manually.
INFORMATION:
The XCubeDAS XD5300 series features the seven-segment LED display
for users to easily identify a specific XCubeDAS system. The enclosure ID
is assigned by head unit (XCubeSAN series) automatically. The seven -
segment LED display supports up to ten XCubeDAS systems, and the
numbering rule will start from 1 to A. For dual controller models, both
controllers will display the same enclosure ID. After the XD5300 had been
assigned the enclosure ID, head unit will assign the same enclosure ID
when the system reboots or goes shutdown. For hardware information
enclosure ID, please refer to the chapter 2.7, Seven-segment LED Display
section in the
CAUTION:
Process the Clean Expansion Enclosure ID function will force the system
shutdown to clean all configurations of expansion enclosure ID.
XCubeDAS Hardware Owner's Manual.
System Settings
83