Qsan XS5224D User Manual page 86

 MAC Address: Display the MAC address of the management port.
 IP Address: The option can change IP address for remote administration usage. There
are three options for DHCP, BOOTP, or Static IP Address.
 DNS Server Address: DNS (Domain Name System) provides a means to translate FQDN
(Fully Qualified Domain Name) to IP address. Some notification services need DNS
setting. Enter an IP address of DNS server here.
 Service Ports: If the default port numbers of HTTP Port, HTTPS Port, and SSH Port are
not allowed on your network environment, they can be changed here.
When finished, click the Apply button to take effect.
64 ©
Copyright 2017 QSAN Technology, Inc. All Right Reserved.
INFORMATION:
For deployment of management ports, please refer to the chapter 4
Deployment Types and Cabling
Manual.
INFORMATION:
DHCP: The Dynamic Host Configuration Protocol is a standardized
network protocol used on IP (Internet Protocol) networks for dynamically
distributing network configuration parameters, such as IP addresses for
interfaces and services. With DHCP, computers request IP addresses and
networking parameters automatically from a DHCP server, reducing the
need for a network administrator or a user to configure these settings
manually.
BOOTP: Similar to DHCP, the Bootstrap Protocol is also a computer
networking protocol used in Internet Protocol networks to automatically
assign an IP address to network devices from a configuration server.
While some parts of BOOTP have been effectively superseded by the
DHCP, which adds the feature of leases, parts of BOOTP are used to
provide service to the DHCP protocol. DHCP servers also provide legacy
BOOTP functionality.
in the XCubeSAN Hardware Owner's