Table of Contents
Advertisement
Place the twig so the
pin on the rear log
inserts into the hole on
the twig.
Place the upright log as shown. When
installed the top is parallel with the burner
and there is a gap under the right "leg".
Place the ember chunks
along the perimeter of the
burner (do not place over
the burner holes).
Preparing the Rock Wool:
The rock wool comes in one
clump. Tear off "dime" sized
clumps and flatten. Then pull on
the wool to create gauze-like
pieces. The wool glows best
when very thin and porous.
- Quick Links:
- Replacement Parts List
Hide quick links:
Advertisement
Table of Contents
