Advertisement
Step 5
You will need:
8x Bolts
M6 x 15mm
(H1)
(H1)
(H1)
Attach the Side Rails (P15 & P16) to the end assembles using 8x Bolts (H1).
Step 6
(Tools not provided)
Mallet
Attach the Slats (P8). Some effort is required to pull each slat into position as the centre strap is
designed to keep the slats tight.
Well done. You have assembled the bottom bed. The two beds will now be put together to form
the bunk bed.
note: In the future if you require two single beds, the bunk can be disassembled. Remember to
remove the mid posts from the bottom bed and insert the spare end caps.
M4-Allen key provided
(H1)
(H1)
(P15)
note:holes for ladder
(P16)
(H1)
(H1)
(H1)
(H1)
(P8)
Page 6
Advertisement
