Advertisement
FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE
THAT IS NOT COVERED BY YOUR WARRANTY
Read Instructions carefully.
Check no parts are missing.
3
Carefully identify each component, especially
those that are similar. The most common mistake
is getting things back to front.
5
fully tighten screws（leave slightly
loose .When the item is fully assembled
tighten the screws - but do not over tighten.
WA RNI NG
WA RN NG
2
Lay out all of the components on a soft surface
as if you were preparing to do a jigsaw puzzle.
4
Separate and identify each component from the
hardware pack and rest each one in its proper
6
DO NOT
If glue is required
certain that the parts belong together.
set until you are
Page 2
Advertisement
