Advertisement
Step 3
(Tools not provided)
Mallet
Well done. You have assembled the top bed, and now we will assemble the bottom bed.
Step 4
You will need:
4x Bolts
M6 x 15mm
(H1)
4x Bolts
M6 x 65mm
(H3)
4x Foot Endcap
(H7)
Insert Mid Posts (P9) into Lower Posts (P10 & P11), then attach these to
Base End Panel (P12) using 2x Bolts (H1) and 2x Bolts (H3). Insert 2x Foot Endcap (H7)
into each Lower Post. Repeat same for the other base end as shown.
Attach the Slats (P8).
Some effort is required to pull each slat into
position as the centre strap is designed to keep the slats tight.
M4-Allen key provided
(P9)
(H3)
(P12)
(H1)
(P10)
(H7)
Assemble the bottom bed
(P9)
(P9)
(H3)
(H3)
(H1)
(H1)
(P13)
(P11)
(H7)
(H7)
（P8）
(P9)
(H3)
(P12)
(H1)
(P14)
(H7)
Page 5
Advertisement
