2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Tools Needed
JNCSI
1
LE3
JD1
BIOS
SATA9
SATA10
S-SATA1
S-SATA2
JSD1 JSD2
SATA DOM
Location of Mounting Holes
Notes: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
BMC
FAN6
FAN5
X11DAi-N
REV:1.01
Battery
BT1
PCH
JNVME2
JNVME1
FAN4 FAN3
POWER
Standoffs (10)
Screws
Only if Needed
(10)
USB8/9
(3.1)
AUDIO
LAN1/2
CPU2
BAR CODE
MAC CODE
CPU1
23
Chapter 2: Installation
VGA
USB1~4
(3.0)
JF1
LE2
FAN2
FAN1