Super X11DAi-N User's Manual
Motherboard Features
CPU
•
Dual Intel Xeon 81xx/61xx/51xx/41xx/31xx Series processors (P0); each processor supports Socket P0 and Intel® UltaPath
Interconnect (UPI) of up to 10.4 GT/s
Note: Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers. Refer
to the block diagram on page 18 to determine which slots or devices may be affected.
Memory
•
Integrated memory controller supports up to 2048 GB of Load Reduced DIMM (LRDIMM), 3D LRDIMM, Non-Volatile DIMM
(NV-DIMM) DDR4 (288-pin) ECC 2133/2400/2666/2933/3200 MHz modules in 16 slots.
DIMM Size
•
Up to 128 GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
•
Intel C621
Expansion Slots
•
Four (4) PCI-Express 3.0 X16 slots: Slot1/Slot2 (supported by CPU1), Slot3/Slot5 (supported by CPU2)
•
Two (2) PCI-Express 3.0 X8 slots: Slot4/Slot6 (supported by CPU2)
BaseBoard Management Controller (BMC)
•
ASpeed AST 2500 Baseboard Controller (BMC) supports IPMI 2.0
Graphics
•
Graphics controller via AST 2500 BMC (BaseBoard Management Controller)
Network Connection
•
Two Gigabit (10/100/1000 Mb/s) Ethernet ports (GLAN 1/GLAN 2) supported by Intel PCH C621
•
One IPMI shared LAN supported by the AST2500 BMC
I/O Devices
•
VGA
•
Audio
•
SATA 3.0
Motherboard Features
•
One (1) VGA port on the I/O back panel
•
One (1) 7.1 High Definition (HD) Audio connector on the I/O back panel
•
One (1) Audio connection header for front access
•
Eight (8) SATA 3.0 ports supported by Intel PCH (SATA 1-8)
•
Two (2) SATA 3.1 ports with power-pins built-in and can support Supermicro
(SuperDOM), S-SATA1/2 ports are supported by Intel SCU
•
RAID 0, 1, 10
14