Bmc Network Configuration - Supermicro X11DAi-N User Manual

X11DAi-N User's Manual
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system event log
is full. Select Erase Immediately to erase all events in the log when the system event log is
full. The options are Do Nothing and Erase Immediately.
Custom EFI Logging Options
Log EFI Status Codes
This feature allows the user to determine whether the BIOS will log EFI Status Cods, error
code only, progress code only, or both. The optioins are Disabled, Both, Error code, and
Progress code
Note: After making changes on a setting, be sure to reboot the system for the changes
to take effect.

BMC Network Configuration


BMC Network Configuration
IPMI LAN Selection
This item displays the IPMI LAN setting. The default setting is Failover.
IPMI
Network Link Status
This item displays the IPMI Network Link status. The default setting is Dedicated LAN.
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options are No and Yes.
*If the item above set to Yes, the following item will become available for user's
configuration:
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server in the network that is attached to and request the next available
IP address for this computer. The options are DHCP and Static.
Configuration Address Source
This item displays the current configuration address for this computer.
102