Supermicro X11DAi-N User Manual page 60

Super X11DAi-N User's Manual
Management Engine (ME) Recovery
Use jumper JPME1 to select ME Firmware Recovery mode, which will limit resource
allocation for essential system operation only in order to maintain normal power operation
and management. In the single operation mode, online upgrade will be available via Recovery
mode. See the table below for jumper settings.
Manufacturing Mode Select
Close JPME2 to bypass SPI flash security and force the system to use the Manufacturing
Mode, which will allow you to flash the system firmware from a host server to modify system
settings. See the table below for jumper settings.
BMC
JNCSI
1
2
1
X11DAi-N
REV:1.01
LE3
Battery
JD1
BT1
BIOS
PCH
SATA9
SATA10
JNVME2 JNVME1
S-SATA1 S-SATA2
JSD1 JSD2
FAN4 FAN3
SATA DOM
POWER
Manufacturer Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 ME Recovery
Manufacturing Mode Select
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
USB8/9
(3.1)
AUDIO
USB1~4 (3.0)
LAN1/2
FAN6
CPU2
FAN5
BAR CODE
MAC CODE
CPU1
60
1. ME Recovery
VGA
2. Manufacturing Mode Select
JF1
LE2
FAN2 FAN1