Dimm Installation; Dimm Removal - Supermicro X11DAi-N User Manual

DIMM Installation

1. Insert DIMM modules in the following
order: P1-DIMMA1, P1-DIMMD1, P1-
DIMMB1, DIMME1 (DIMMA2 and D2
is reserved for Apache Pass memory.
Standard memory can be populated
in DIMMA2 and D2 but will result in
decreased performance). For the system
to work properly, please use memory
modules of the same type and speed on
the motherboard.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

X11DAi-N
REV:1.01
Release Tabs
Press both notches
straight down into
the memory slot.
37
Chapter 2: Installation
BAR CODE
MAC CODE
Notches