Healthrider HMEL50708 User Manual page 8

5. Attach the Water Bottle Holder (13) to the
Upright (2) with two M4 x 16mm Screws (72).
6. Identify the Left Pedal (10), which has a notch
near the right side.
Place the Left Pedal (10) on the Left Pedal Leg
(4).
Next, apply a generous amount of grease to the
long side of an M8 x 56mm Bolt Set (65) and
the faces of the two indicated Upper Body Arm
Bushings (12). Have a second person hold the
lower end of the left Upper Body Arm (29)
inside the bracket on the Left Pedal Leg (4).
Attach the Left Pedal (10) and the left Upper
Body Arm (29) to the Left Pedal Leg (4) with the
M8 x 56mm Bolt Set (65).
Attach the other end of the Left Pedal (10) to
the Left Pedal Leg (4) with two M8 x 56mm
Patch Screws (83), two M8 Split Washers (85),
and one M4 x 16mm Screw (72).
Repeat this step on the right side of the
elliptical exerciser.
See step 2. Tighten the M10 x 20mm Patch
Screws (70).
5
6
29
65
Grease
72
8
13
72
2
65
10
Notch
4
85
83