Siemens Gigaset S790 Manual page 13

Gigaset S790/S795 / USA-CAN EN / A31008-M2121-R301-1-3S19 / starting.fm / 28.07.2009
¤
Insert the plastic cover provided for the
headset socket to ensure optimum sound
in speaker mode.
Attaching the belt clip
The handset has notches on each side to attach the belt clip.
¤
To attach — press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤
To remove — press the
of the belt clip firmly with your
right thumb, push the fingernail
of your left index finger up
between the clip and the hous-
ing and pull the clip in an
upward direction.
Placing the handset in the base/charger
¤
Place the handset in the base/charger with its display facing forward.
Each handset is registered with the base at the factory. You do not need to reg-
ister the handset again. If you wish to use your handset with a different base or
use further handsets with your base, register the handset manually
¢
( page 46).
To charge the batteries, leave the handset in the base/charger.
Please note
Only place the handset in the designated
handset.
center
base/charger included with the
First steps
13