Connecting The Headset; Connecting The Usb Data Cable - Siemens Gigaset S790 Manual

Gigaset S790/S795 / USA-CAN EN / A31008-M2121-R301-1-3S19 / starting.fm / 28.07.2009
First steps

Connecting the headset

Connecting the USB data cable

18
Warning
Do not charge the handset in charging unit or base while the headset is
connected.
You can connect a standard USB data cable with a mini-B connector to the back
of your handset to connect the handset to a PC (
¤
Remove the belt clip (if attached)
¢
( page 13).
¤
Remove the battery cover
¢
( page 12).
¤
Connect the USB data cable to the USB
socket .
1
After removing the plastic cover, you can connect a
headset to the left-hand side of your telephone with the
2.5 mm jack connector. HAMA and Plantronics M40,
MX100 and MX150 headsets are all suitable.
The headset volume corresponds to the settings for the
¢
handset volume ( page 53).
After using the headset, replace the plastic cover to
enable optimum sound in speaker mode.
A compatibility list of tested headsets can be found on
the Internet at:
www.plantronics.com/productfinder.
¢
page 64).
1