Setting The Date And Time - Siemens Gigaset S790 Manual

Gigaset S790/S795 / USA-CAN EN / A31008-M2121-R301-1-3S19 / starting.fm / 28.07.2009

Setting the date and time

Set the date and time so that the correct date and time can be assigned to
incoming calls, and so that the alarm can be used.
Calls
Date/Time
Date:
01/31/2009
Time:
00:00am
Back
¤
When you switch to time entry, the
Back display key turns to AM/PM.
Enter the hours and minutes in 4-digit
format via the keypad,
e.g., QM 5 for
Change the input position with
the control key if necessary.
If necessary, press the AM/PM display
key to change the time setting from
AM to PM.
¤
Press the key below
play to open the input field.
Time
If you have already set the time and
date, open the input field via the
menu
The Date/Time
¤
The active input position flashes.
Enter
8-digit number via the keypad,
Q 42Q
e.g.,
QO
Save
Press the right or left control
key to change the input posi-
tion and correct an entry.
¤
Press down on the control key to switch
to the time input field.
07:15 am.
First steps
on the dis-
§Time§
¢
( page 28.)
submenu displays.
the month, day and year as an
for 10/14/2009.
Date/Time
Date:
10/14/2009
Time:
00:00am
Back Save
15